Freegenol is a eugenol-free luting cement for temporary cementation of indirect restorations.
It is completely compatible and safe to use with acrylic resin materials. Biocompatible with tooth structure and soft tissue, Freegenol is easy to use and mixes to a smooth, creamy consistency.
INDICATIONS
Cementation of temporary crowns and bridges.
ADVANTAGES
Eugenol-free formula
- Will not burn or irritate soft tissue
- Compatible with plastics
- Will not ruin acrylics
- Will not diminish adhesion of bonded restorations
Thixotropic
- Stays where it is placed
- Flows well under pressure
- Mixes in 20-30 seconds
- Sets hard in three minutes
- Easy clean-up
Features
- Eugenol free, no negative effect on polymerization of resin containing materials
- Short setting time
- Consistency can be adjusted
- Easy to remove from crowns and cores
- Special cleaner included
Key Specifications
COMPOSITION
| Components | % |
| Zinc oxide | 70-75 |
| Vegetable Oil | 21-22 |
| Petrolatum | 3-5 |
- Store at temperature of 4-25°C (39.2-77.0°F)
- Mixing time: 20-30 seconds
- Setting time: 3 minutes from the start of mixing
CONTRAINDICATIONS
In rare cases the product may cause sensitivity to some persons. If such reactions are experienced, discontinue the use of the product and refer to a physician.
CAUTIONS
In case of contact with eyes, flush immediately with water and seek medical attention.
Packaging
- 1 x 20ml Base
- 1 x 20ml Accelerator
Directions to Use
Step 1. Squeeze equal lengths of Base and Accelerator pastes onto the mixing pad.
Step 2. Mix thoroughly for 20-30 seconds.
Step 3. Insert paste into (temporary) crown or bridge and seat onto the prepared dry tooth.
Step 4. Allow to set (3 minutes from start of mixing) and trim excess.
NOTES
- 1. Setting time can be adjusted by using more or less Base (More Base-faster set ; less Base-slower set). Do not go outside Base / Accelerator ratio range 3 : 2 to 2 : 3).
- 2. If material sticks to tooth or metal, Vaseline may be added up to 25% of total mix.
Reviews
There are no reviews yet.