Prevest Denpro Accusil Combo Kit

Description

Accusil Putty, Soft is a very high viscosity two pastes elastomeric Impression Material with excellent hydrophilic properties, dimensional accuracy, high tear strength, and resistance to permanent deformation.

Indications

• Accusil Putty Impression Material is designed to be used with Accusil Light Body in a dual phase impression technique.
• Accusil Putty Impression Materials are suitable for all impression techniques where a high viscosity material would be desired by the operator.
• Impressions of dentulous and edentulous arches, implants and precise duplication of models.

Accusil Light Body is silicone-based impression material for use in dentistry with automatic mixing device. Accusil Light Body is a hydrophilic vinyl polysiloxane impression material for the production of extra ordinarily smooth and highly precision impressions for models, crowns, bridges and dentures.

Indications

• Wash material for the putty-wash impression technique
• Syringe material for the simultaneous mixing technique
• Impression material for relining
• Cavity impression of facing, inlay, onlay, etc
• Impression of crown or bridge
• Impression of partial denture
• Impression of full denture

Features
Accusil Putty_
• Accurate impressions
Extremely smooth
• Hydrophilic properties
Exceptional dimensional stability
• High elasticity – Tear resistant
Maximum elastic recovery
Accusil Light-eggy
Excellent reproduction of marginal contours
• Excellent flow properties
• Excellent wettability
• Ideal working time
Optimal intra-oral setting time
• Good tear strength and dimensional stability
• Compatible with all putty based VPS products

Key Specifications

Accusil Putty, Soft

• Classification ADA Specification No. 19 – Type 1: very high viscosity
• Classification ISO 4823:1992 – Type 0 : putty
• Mixing ratio by weight or volume – 1 part catalyst to 1 part base
• Mix Time – 45 seconds
• Work Time(including mixing time) (ADA= total working time (ISO) – 2 min. – 2 min. 30 sec
• Minimum time in mouth (ISO) (not including work time) – 2 min. 30 sec. – 3 min.
• Minimum removal time (ADA) Setting time (ISO) – 5 min. from start of mix
• Linear dimensional change (ISO, ADA) – < 0.5%
• Strain in compression (ISO, ADA) – 1.2% – 2.2%
• Recovery from deformation (ISO) – > 99%
• Permanent deformation (ADA) – <1%
• Detail reproduction – 20 μ

Accusil Light Body

• Color  – Yellow
• Classification ISO 4823/ADA Spec. No. 19 – Type 3 light-bodied consistency
• Mixing ratio (Base : Catalyst) – 1:1
• Strain in Compression (Min.–Max.) – 3% – 5%
• Recovery from deformation – >99.5%
• Linear dimensional change (24hrs) -<0.20%
• Hardness “Shore A” – 60 ± 2
• Mixing Time -Auto Mixing System
• Total Working Time – 2’00”
• Time in Mouth (minimum) – 3’30”
• Total Setting Time – 5’30”