Maarc MTA is a powder & liquid system consisting of tricalcium and dicalcium silicate. Maarc MTA is white in color and does not stain the tooth. The powder is fine-grained which makes it ideal to be used as a sealer / in putty consistency as desired. The pH of the mix is higher than 10.5 which makes it the best material for root repair.
MTA cements provide better microleakage protection than traditional endodontic repair material. MTA material can be used as apical and furcation restorative materials as well as medicaments for apexogenesis and apexification treatments.
Indications:
- Indirect pulp capping
- Direct pulp capping / partial pulpotomy
- Cavity liner/base
- Pulpotomy
- Apexogenesis & Apexification
- Perforation repair
- Root-end filling
- Obturation
Features
- Excellent Handling Properties
- Fine Grain
- Fast Setting
- Pure Mineral Tech : No Discoloration
- Bactericidal effect due to High pH
- Biocompatible
- Promotes mineralization of tissue
- High Strength make is suitable as base restoration material
- Good radiopacity
Key Specifications
COMPOSITION:
- Tricalcium silicate
- Dicalcium silicate
- Tricalcium aluminate
- Calcium oxide
- Radiopacifier and modifiers in traces
SPECIFICATIONS:
- Working Time: Approx 4 mins
- Initial setting: 15 mins at room temperature and it attains strength to continue the treatment
- Strength on setting: 60 MPa
Packaging
Maarc MTA Repair Material
- 1 x 1g Powder
- 1 x 5ml Liquid
MTA (Mineral trioxide Aggregate ) – Unidose Kit
- 1 x 180mg Powder
- 1 x 2ml Liquid
Direction to Use
- Sterile glass slab, spatula and all instruments for the insertion of MAARC
- Dispense Powder as per requirement and a drop of distilled water till the hydrated. (Liquid provided)
- The MTA paste is obtained by mixing powder and liquid to obtain putty like consistency.
- The mix is then placed in the desired location
- Condensed lightly with a moistened cotton pellet.
Warning and Precautions:
- MAARC MTA repair material must be stored
- It must be kept in its sealed packaging prior to use to avoid degradation by moisture.
- It must be placed intra-orally immediately after mixing with liquid, to prevent dehydration.
- Avoid skin contact to prevent irritation and possible Allergic response. If contact with skin occurs, immediate Remove material with cotton and wash thoroughly.
- In case of skin sensitization or rash, discontinue use and seek medical attention.
- Do not use MAARC MTA to fill root canal, its viscosity And setting time are inadequate for this procedure also it will be very difficult to remove in case of
- Excess of MAARC MTA is not intended as it may impair healing process
- Do not use it on patients with reported sensitivity to any of the component.
Reviews
There are no reviews yet.