Dentsply Aquasil Soft Putty Regular Set 2x450ml

Features

• Very high viscosity elastomer
• Excellent hydrophilicity
• Outstanding dimensional accuracy
• High tear strength
• Resistance to permanent deformation
• High wettability
• Precise dental impressions

Descriptions

Additionally, Aquasil Soft Putty/Regular Set is compatible with various casting and electroplating techniques, allowing for diverse applications in dental laboratories. It can be poured after a certain waiting period to avoid surface porosity and can also be silver or copper plated, opening up possibilities for creating high-quality dental models.To achieve optimal outcomes, it is important to follow the recommended instructions for usage. This includes proper tray preparation, thorough mixing of the base and catalyst components, and timely seating and setting of the impression. By adhering to these guidelines, dental professionals can maximize the performance of Aquasil Soft Putty/Regular Set and achieve precise and reliable impressions.

COMPOSITION:

Base: 

• Silica Crystalline
• Vinyldimethicone
• Zeolith Highly dispersed silica (AEROSIL®1)
• Paraffine oil
• Polydimethyl-hydrogen siloxane
• Green pigment (Cosmetic Green, C.I. 77288)
• Yellow pigment (Arc Yellow A16 N)

Catalyst: 

• Silica Crystalline
• Vinyldimethicone
• Zeolith
• Highly dispersed silica (AEROSIL®1)
• Paraffine oil
• Platinum complex + Pt-metal
• Calcium carbonate 1,3-Divinyltetramethyldisiloxane
• Titanium dioxide

INDICATION:

• It is for use as a tray material for the double mix technique or as primary impression material for a two-step putty/wash technique.

ADVANTAGE:

• High tear strength.
• More stable dimensionally in storage ( No syneresis, imbibition or evaporation)

Specifications

PROPERTIES OF AQUASIL PUTTY:

• Material Properties: Aquasil Soft Putty
• Delivery System: Tubs
• Mixing technique: Knead with fingertips until a uniform color is achieved.
• Mixing Ratio: 1:1
• Linear dimensional change: 0.05%
• Maximum compression strain: 3.5%
• Permanent deformation: 0.5%
• Recovery from deformation: 99.5%
• Reproduction of detail: <50µm

Direction to Use

STEP 1- Preparation of Impression Area

Clean the Impression area with air/water spray and remove excess water.

STEP 2- Mixing and filling the tray

Take equal amounts of catalyst and base using the color-coded measuring spoons and knead with fingertips until the colour of the mix is uniform. Immediately fill the prepared tray.

NOTE: Do not interchange measuring spoons and tub lids.

Packaging

• 1 x 450 ml Catalyst
• 1 x 450 ml Base.
• 2 Spoons