D-Tech Lute Plus Strontium Glass Ionomer Cement

Strontium based Glass Ionomer Luting Cement

Product Information

Lute Plus is a Strontium based radiopaque glass ionomer luting cement containing ultrafine particles thereby enabling a thin film and excellent flow which is vital for a good luting cement. The powder is packed in a pharma grade glass bottle with a tamper evident cap and the dropper comes with a metered dose which enables accurate dispensing resulting in ideal powder to liquid ratios.

Features

Ultra thin film
High radiopacity
Extended working time
Impermeable glass bottle
Accurate dispensing

Instructions for use .

Description

Dtech Lute Plus Glass Ionomer Cement Type 1 Luting Cement is a radiopaque glass polyalkeonate chemically cured strontium based glass ionomer cement ideal for basic routine luting of metal-based restorations. It provides excellent adhesion to both tooth and metal. Biocompatibility and a tooth-like coefficient of thermal expansion reduces the risk of post-operative sensitivity. Good mixing properties results in a smooth creamy mix with good flow. Film thickness of just 15 microns makes complete seating of crowns easy. Extended working time with sharp set. Long term fluoride release.

It Provides excellent chemical bond to enamel and dentin while its extremely low film thickness optimizes fit and marginal integrity.

Indications :

• Luting of metal – based crowns,bridges,inlays and onlays.
• Luting of high-strength all ceramic crowns and bridges.
• Luting of metals-based and high strength all-ceramic crowns and bridges on implants abutments.
• Luting of metal root posts or indirect metal post core build-ups.
• Luting of prefabricated steel crowns.
• Luting of orthodontics bands.
• Base or liner

Key Specifications

Technical Data:

• Shelf life : 2 years from date of manufacture

Packaging

1 x 12g Lute+ Powder Bottle
1 x 9g Lute+ Liquid Dropper
Mixing pad
Spoon

Direction to Use

• Clean and dry enamel and dentin thoroughly.
• Shake powder bottle to uniformly blend the special powders.
• Dispense 1 full scoop of powder to a mixing pad or glass slab.
• Dispense 2 drops of liquid into the mixing pad or glass slab. When dispensing liquid, hold the dropper vertically.
• Incorporate powder into liquid in small increments. Total mixing time should not exceed 45 seconds
• Apply the material, without delay, in a uniform layer.
• Placement of mixed cement should be done immediately while mix is still glossy; approximately 1.5 to 2 minutes working time. If cement becomes dull, it should be discarded and a new mixture prepared. If a longer working time is needed, mix the cement on a cold, dry slab.
• Excess cement should be removed with a cotton roll immediately, before it sets, and should be cleaned from all surrounding areas such as gingiva and adjacent teeth before final setting.

Warranty

• Warranty is not applicable for this product.