The Visible Light Cure Composite is an orthodontic adhesive kit featuring advanced composition, enabling precise and strong bonding during orthodontic procedures.
Features
- Advanced composition for strong bonds
- Detailed tooth preparation instructions
- Convenient disposable primer brushes
- Precise bracket positioning
- Efficient 90-second curing with lamp
- Gentle bracket removal with ligature cutter
- Comprehensive kit for complete bonding process
Description
INDICATIONS:
- Bonds Metal & Ceramic brackets to tooth surface
- For cementation of molar bands
Key Specifications
- Composition: Crystalline and fumed silicon dioxide, Bisg-ma stabilizer, Photo initiators
- Application:Cementation of orthodontic brackets
- Tooth Preparation: Prophy with plain pumice, Etching solution application, Thorough rinsing
- Bracket Placement: Thin primer coat, 45 seconds conditioning for plastic brackets, 90-second curing with lamp
- Bracket Removal: Ligature cutter usage, Slow peeling to avoid shearing, Polishing with pumice after removal
- Time Efficiency:5-minute check for loose bonds after bracket placement
Packaging
- 1 x 5gm Adhesive Tube
- 1 x 3.5gm Dental Etchent (Frost)
- 1 x 3gm Bonding Agent
- 10 x Plastic Applicator Brushes
- 1 x Mixing Pad
Direction to Use
Tooth Preparation:
- Clean the enamel surfaces with plain pumice, avoiding oil or fluoride-containing pastes.
- Rinse thoroughly and dry teeth with oil and moisture-free compressed air. Ensure the patient does not rinse.
- Isolate cleaned teeth for optimal etching conditions.
- Dispense 1 to 2 drops of etching solution onto a dispensing pad. Apply the solution with a dabbing motion to the prophy teeth to be bonded for 60 seconds.
- Rinse thoroughly with water, ensuring no contamination. Re-isolate and dry the tooth thoroughly.
Application of Adhesive Bracket Placement:
- Apply a thin coat of primer to each etched, dry tooth and the underside of each bracket base using a disposable primer brush.
- Allow approximately 45 seconds for plastic brackets to condition.
- Apply a small quantity of adhesive paste to the underside of the bracket base and place it on the tooth.
- Adjust the bracket position as necessary. Activate the composite adhesive with the curing lamp for at least 90 seconds.
- Do not move the bracket once the adhesive hardens. Remove excess adhesive if needed.
Bracket & Adhesive Removal:
- Use a ligature cutter to grab the adhesive at the enamel adhesive interface and slowly peel the bracket/base off the tooth.
- Avoid shearing or twisting forces during removal.
- Clean surfaces with a sealing instrument and polish with pumice.
Warranty
- Warranty is not applicable for this product.
Reviews
There are no reviews yet.