Prime & Bond universal provides well balanced hydrophobic and hydrophilic properties to ensure complete coverage and penetration at varying moisture levels. So even if dentin is overly wet or dry, you get a reliable bond that actively guards against the leading causes of adhesive failure.

Prime & bond universal provides:

• Versatility for use with all etching methods, all indications
• Reliable performance on over-wet and over-dried dentin
• Virtually no post-operative sensitivity
• Low film thickness for a reduced risk of pooling and misfit of the
restoration
• A relaxed working time and reduced waste, remaining usable for 30 minutes in a closed CliXdish
• High initial bond strength with Calibra Ceram cement for indirect
restorations
• A patented formulation free of HEMA, TEGDMA, or bisphenol.

INDICATIONS:

Direct, light-cured composite and compomer restorations.
Composite, ceramic and amalgam repairs.
Cavity varnish for use with fresh amalgam.

Features

Active moisture control – Reliable bonding performance, no matter if the dentin is still too wet or already too dry – for virtually no post-operative sensitivity.
Active cavity spreading – Actively spreads in the cavity and helps to cover all cavity surfaces.
Self levelling – The adhesives self-levels to form a smooth and uniform adhesive layer, helping to avoid dry spots or adhesive pooling.
Low film thickness – Adhesive pools can show up as translucent areas on a radiograph, which can easily be misdiagnosed as a void. Thick adhesives may also change crown prep geometry impacting crown fit.

Specifications

Versatility: It can be used with all etching methods and for all indications, making it suitable for a wide range of dental procedures.
Reliable performance: It demonstrates reliable bonding performance even on dentin that is overly wet or dry, ensuring consistent results.
Minimal post-operative sensitivity: The adhesive formulation minimizes the risk of post-operative sensitivity, providing comfort to the patient after the procedure.
Low film thickness: The adhesive has a low film thickness, reducing the chances of pooling and misfit of the restoration, which can compromise the final result.
Extended working time: Prime & Bond Universal remains usable for 30 minutes in a closed CliXdish, providing a relaxed working time and reducing waste.
High initial bond strength: When used with Calibra Ceram cement for indirect restorations, it offers high initial bond strength, ensuring the longevity of the restoration.
Free of certain chemicals: The patented formulation of Prime & Bond Universal is free of HEMA (2-hydroxyethyl methacrylate), TEGDMA (triethylene glycol dimethacrylate), or bisphenol, addressing concerns related to these substances.